• Double-Ibr Roofing Sheet Forming Machine

Double-Ibr Roofing Sheet Forming Machine

Certification: ISO, ISO9001:2000,ISO 9001:2008,Ce,RoHS,ISO9001:2000
Condition: New
Power Required: 380V/50Hz /3phase
Main Power: 5.5kw
Hydraulic Power: 4kw
Thickness of Structure: 16mm
Customization:

Contact Supplier

Diamond Member Since 2010

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
900/860
Chians
1 Inch
Cutting System
Cut to Length
Type
Metal Roof Tile Machine
Method
CNC Processing
Processing
CNC Lathe Processing
Product
Roof
Transport Package
According to Customers′ Request
Specification
CE and ISO9001: 2008ukas
Trademark
JCX
Origin
China Hebei
HS Code
8455211000
Production Capacity
40sets Per Month

Product Description

Roll forming line
NO. ITEM PARAMETER NOTE
1.
 
 
 
Suitable 
material
 
Type Pre-painted sheet,
Galvanized sheet
 
    Width(mm) 1000mm  
    Thickness(mm) 0.22-0.8mm  
    Yield stress(mm) G230MPA  
2. Product 
specifications
Detail as the attached file
    Length Any length  
3. Power 
requirement
 
Type 380v/3ph/50hz  
    Main Motor power 4kw  
    Cutter power 4kw  
4. Forming speed(m/min) 8-15 Not include the time of cutting
5. Manual Decoiler
 
(Optional)
Type Manual  
    Max capacity 5t  
    Suitable coil OD(MM) 1000  
    Suitable coil
ID(MM)
508  
6. Forming stand 18 Depend on actual design
7. Thickness of structure 16mm  
8. Forming shaft diameter(mm) 75  
9. Type of cutting Roll formed and length-set cutting  
10. Control system Mitsubish PLC and Schneider inverter  
11. Install dimension(depend on the final design) 9.8m×1.5m×1m Without panel length
12. Total weight (Approx) 4T Depend on final design
13 Cross bar (Rod) diameter 22mm   
14 Sleeve  diameter 90mm Higher wall thick sleeve instead of GI Pipes Tight
alignment between sleeve and rollers. Tightening of nut is not at all
required.
 
15 Chains and sprockets 1.5'  
16 Guide rollers(at output of the machine) Diameter 50mm 2Nos  
17 Shearing blade thickness 22mm
NO. ITEM PARAMETER NOTE
1.
 
 
 
Suitable 
material
 
Type Pre-painted sheet,
Galvanized sheet
 
    Width(mm) 1220mm  
    Thickness(mm) 0.22-0.5mm  
    Yield stress(mm) G550MPA  
2. Product 
specifications
Detail as the attached file
    Length Any length  
3. Power 
requirement
 
Type 380v/3ph/50hz  
    Main Motor power 4kw  
    Cutter power 4kw  
4. Forming speed(m/min) 8-15 Not include the time of cutting
5. Manual Decoiler
 
(Optional)
Type Manual  
    Max capacity 5t  
    Suitable coil OD(MM) 1000  
    Suitable coil
ID(MM)
508  
6. Forming stand 18 Depend on actual design
7. Thickness of structure 16mm  
8. Forming shaft diameter(mm) 75  
9. Type of cutting Roll formed and length-set cutting  
10. Control system Mitsubish PLC and Schneider inverter  
11. Install dimension(depend on the final design) 9.8m×1.5m×1m Without panel length
12. Total weight (Approx) 4T Depend on final design
13 Cross bar (Rod) diameter 22mm   
14 Sleeve  diameter 90mm Higher wall thick sleeve instead of GI Pipes Tight
alignment between sleeve and rollers. Tightening of nut is not at all
required.
 
15 Chains and sprockets 1.5'  
16 Guide rollers(at output of the machine) Diameter 50mm 2Nos  
17 Shearing blade thickness 22mm  
COMPONENT OF WHOLE SET OF MACHINE

Manual decoiler-main machine-hydraulic pump-control box- cut to length device- runout table

Send your message to this supplier

*From:
*To:
avatar Ms. Hope Ha
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now