Metal Ridge Capping Roll Forming Machine in Africa

• Tile Type: Colored Steel
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Usage: Roof
• Transmission Method: Machinery
• Model NO.: ridge capping machine
• Suitable Material to Produce: Galvanized Steel
• Thickness of Raw Material: 0.3-0.8mm, or as Your Request
• Main Power of Machine: 7.5kw
• Power of Cutting: 4kw
• Material of Cutter: Cr12 with Heat Treatment
• Material of Roller: 45 Steel, with Chrome Coating
• Splint Thickness: 20mm
• Color of Machine: Blue or as Your Request
• Driving of Machine: Chain Driving
• Sizes of Chain: 1inch
• Transport Package: Covered with Plastic Films
• Specification: ISO9001
• Trademark: JCX OR OEM
• Origin: China
• HS Code: 84552210
• Production Capacity: 30sets/Month

Product Description

 
Metal Ridge capping roll forming machine in Africa
 
 A.Roll forming machine
1.Forming stations:12roll stations
2.Shaft:O.D.70mm,high frequency treatment and color coating
3.Material of rollers:S45C with heat treatment,and surface is being hard chrome coated
4.Horsepower:7.5sets
5.Transmission:Chain
6.Forming Speed:8-11meters/minute
7.Forming Thickness:0.3-0.8mm
(1)CQ mild sheet is used,yiled strength=235-300MPA)
(2)The finished products will slightly change if using different material and thickness.
8.Cutting:
(1)Flat sheet cutting:it is used when changing the coil of raw material.It can cut the sheet rapidly and be time saving (2)Cutting after forming:Cut the sheet after roll forming to required length
(3)Cutting motion:The main machine automaticlly stops and the cutting will take place.After the cutting,the main machine will automaticlly start.
(4)Material of blade:cr12 with heat treatment,hardness:58-62HRC
(5)Length measuring:automatic length measuring
(6)Tolerance of length:+/-2mm
9.Approximate size:length:9.6m*width:1.3m*height:1.4m
10.Characteristics of the main machine
(1)Base is made of high tensile strength H beam with precision welded and god rigidity
(2)Shaft,roller and all components are manufacturered precisely to have long lifetime
(3)Efficient design,easy maintence.

B.Uncoiler
1.Specification:Single head hydraulic uncoiler: 1SET
(1)Horsepower:3kw
(2)Capacity of uncoiler:5tons
(3)Expansion of segment:hydraulic
(4)Rotation of segment:hydraulic
(5)Number of segment:4
(6)Range of segment expansion:480-520mm
(7)Maximum outer diameter of coil:1.7m
(8)Maximum width of coil:1250mm
(10)Feeding speed:0-30meters/minute
(11)Approximate size:Length:2.3m width:1.1m height:1.5m
(12)Speed control:A sensor used to control the speed
(13)Operation method:Manual&Automatic
(14)Characteristics;Hydraulic system is used to be the power of the open,closure and rotation of segment.The speed sensor of the uncoiler.The speed sensor of the uncoiler enables the uncoiler to automaticlly adjust the speed to match up the production of the roll forming machine

C.Control Panel:
1.Constrol system:
?The whole line is controller by PLC and touch screen.The PLC system is with high speed communication module,it is easy for operation.The technical date and system parameters can be set by touch screen. The brand of main componeents:
(1)PLC:panasonic
(2)Frequency:Schnieder
(3)Touch screen:xinjie ?The total length of the order is automaticlly counted;When the material's supplu is enough,the material will automaticlly stop entering the machine,which is the convenient device for changing different mateiral for different orders.
?Noted:all the parameters can be changed as the customer's requirement,and different machine.
 
 
 

Technical parameters:
1	Name of commodity & specification			XN-1000 roof panel roll forming machine
2	Main motor power			4/5.5/7.5kw, 3 phase
3	Hydraulic motor power			3kw
4	Hydraulic Pressure			10-12MPa
5	Voltage			380V /3phase/ 50 HZ (or as your requirement)
6	Control System			PLC Delta Inverter
7	Main Frame			300mm H-Beam
8	Backboard Thickness			14mm
9	Chain Size			20mm
10	Feeding Material			color steel coils
11	Feeding Thickness			0.3-0.8mm
12	Feeding Width			1200mm
13	Effective width			950mm
14	Productivity			1-3m/min
15	Roll Station			13
16	Roller Diameter			70mm
17	Roller material			45# steel
18	Cutter material			Cr12 , quenched
19	Cr-Plating Size			0.05mm
20	Overall Size			6000×1650×1100mm
21	Total Weight			4T
22	Components			Manual Uncoiler-------------------1 set Guiding Platform------------------1 set Coil Strip Leveler------------------1 set Main Machine of Roll Forming------1 set Electric-Motor---------------------1 set Cutting Device--------------------1 set Hydraulic Station------------------1 set PLC Control-----------------------1 set Supporter Table-------------------1 set
23	Workflow			Manual decoiling----feeding and guiding----roll forming----cut to length----run out table
24	Package			nude in the container
25	Minimum order quantity			1 set
26	Payment terms			T/T(30% T/T pay in advance, the remaining 70% pay before ship)
27	Delivery time			30  working days later after receiving the deposit
All technical parameters can be changed, according to user's need.