Both Corrugation Sheet and Ibr Roofing sheet Forming Machines Introducation
This machine is made up of roll forming machine, molding press, cutting machine, PLC computer control and hydraulic system
The machine is stable, no noise, no shake
Controlling by computer, PLC display, operation is easy, running is steady and reliable, endurable, maintenance-free
Cutting machine is characterized by stable driving, easy operation
Hydraulic system use the CDF-10 hydraulic pump, long operating life, no noise
This machine is applies to roof fortification
Specificitions
| NO. |
ITEM |
PARAMETER |
NOTE |
1.
|
Suitable
material
|
Type |
Pre-painted sheet,
Galvanized sheet |
|
| |
|
Width(mm) |
1250mm |
|
| |
|
Thickness(mm) |
0.3-0.8mm |
|
| |
|
Yield stress(mm) |
G220-G300 |
|
| 2. |
Product
specifications |
Detail as the attached file |
| |
|
Length |
Any length |
|
| 3. |
Power
requirement
|
Type |
220v/380v/3ph/50hz |
Motor brand shanghai Lichao |
| |
|
Main Motor power |
5.5kw |
|
| |
|
Cutter power |
4kw |
|
| 4. |
Forming speed(m/min) |
10-15m/min |
Not include the time of cutting |
| 5. |
Manual Decoiler
(Optional) |
Type |
Manual |
|
| |
|
Max capacity |
5t |
|
| |
|
Suitable coil OD(MM) |
1000 |
|
| |
|
Suitable coil
ID(MM) |
508 |
|
| 6. |
Forming stand |
18 |
Depend on actual design |
| 7. |
Thickness of structure |
16mm |
|
| 8. |
Forming shaft diameter(mm) |
70 solid |
|
| 9. |
Type of cutting |
Roll formed and length-set cutting |
|
| 10. |
Control system |
Panasonic PLC and inverter |
|
| 11. |
Install dimension(depend on the final design) |
8.2m×1.5m×1m |
Without panel length |
| 12. |
Total weight (Approx) |
5.5T |
Depend on final design |
Decoilling the sheet--sheet guilding--film covering--roll forming--measure length--cutting the panel--panel to the supporter
Machine Feature:
1. Precise forming
2. High-solid forming stand guarantees the goods and uniform high quality of final productd
3. The operation automatically minimizes the tolerance of cutting length
Products Feature:
1. A stylish and attractive design, giving the apperance of a traditional roof tile.
2. Resistant to frost, heat, hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models.
3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.
Technical Parameters:
Material Spec: Colored steel sheet; Galvanized steel sheet
Thickness of coil sheet: 0.3-0.8mm
Main Motor Power: 4 kw
Forming Speed: 10.0-15.0m/min
Hydraulic station power: 3kw
Quantity of stand: About 14 or 16 stands
Hydraulic pressure: 10-12mpa
Controlling system: PLC
Index error of length: 10m+2mm
Total weight: About 6 tons
Voltage: 380V 3phase 60 HZ or at buyer's requirement
Material of main equipment
Roller material: High grade NO. 45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm
Active shaft material: High grade NO. 45 carbon wrought steel at Φ 72mm
Cutting blade: Cr12 mould steel with quenched treatment.
Audited Supplier 
){kind=link}
){kind=link}