Cold Roll Forming Rain Water Downpipe/Downspout Making Machine
Down Pipe Rain Spout cold roll forming machine can bend the roll formed pipe, and let the drainpipe and the bending connect to be the whole.The product after roll forming has long working time than the tranditional ppc pipe, and not aging. It can make the project more integrate, and help to enhance the image of the all project.
Water gutter cold roll forming machine is composed of uncoiler, the feed leading table, the main machine, the formation cutting device, hydraulic system, control system and the product bracket.
1.Main parameters of Down spout /downpipe machine:
Parameters of raw material
| Material |
Thickness |
I.D |
Yield Strength |
Q235
Gi&ppgi& galvalume,aluminum,copper |
0.4-0.7mm |
508mm |
<=235mpa |
Decoiling → Roll Forming →Hydraulic cutting→Collecting table
2.Photos of Cold Roll Forming Rain Water Downpipe/Downspout Making Machine
:
2.1 Round shape water downspout downpipe cold roll forming machine:
2.2 Square water down spout/ downpipe roll forming machine:
2.3 Down spout and downpipe elbow machine:
3.Technology parameters of Cold Roll Forming Rain Water Downpipe/Downspout Making Machine:
The weight of Aluminium PPGI Rain Water Gutter Roll Forming Machine is about 5.2 tons.The total dimension of machine:8700(L)*600(W)*1200mm(H)
3.1 Manual decoiler of Cold Roll Forming Rain Water Downpipe/Downspout Making Machine:
Capacity of uncoiler:5ton
Expansion of segment:Manual
Rotation of segment:Manual
Number of segment:4
Range of segment expansion:480-520mm
Operation method:Manual
Qty: 1
3.2 Guiding system of Cold Roll Forming Rain Water Downpipe/Downspout Making Machine:
To keep the material straight
Entrance and adjustable wheel: 2rolls
Qty: 1
3.3 Main forming machine of Cold Roll Forming Rain Water Downpipe/Downspout Making Machine:
Coil thickness:0.35- 0.7mm
motor type: 3 phase asynchronous motor
Main motor power:5.5kw+4kw(normal speed),
Approx.19groups roller including correction rollers
Roller : S45C with quenching treatment,Shafts of rollers are tooled by grinding machine for two times to ensure the precision of final product.
Shaft:Diameter of max shaft: ø70mm(hardening and tempering)
Transmission type:by one inch chain
Qty: 1
3.4 Hydraulic cutting of Cold Roll Forming Rain Water Downpipe/Downspout Making Machine:
Material of blade: Cr12Mov,HRC58-62
Length measuring: Automatic encoder length measuring
Type of cutting:Cutting after forming:Cut the sheet after roll forming to required length.No need to change mold for different sizes
Cutting motion:The main machine automatically stops and the cutting will take place.After the cutting,the main machine will automatically start.
Power of motor:3kw
3.5 Product support frame of Cold Roll Forming Rain Water Downpipe/Downspout Making Machine:
Size: L 3m x W0.5m
Audited Supplier 
){kind=link}
){kind=link}