Galvanized Metal Standing Seam Roof Sheet Roll Forming Machine
Galvanized Metal Standing Seam Roof Sheet is used a lot in Ghana.Our Galvanized Metal Standing Seam Roof Sheet Roll Forming Machine is composed of manual decoiler,main forming machine,automatic cutting.
Our Galvanized Metal Standing Seam Roof Sheet Roll Forming Machine can be used a workshop.
The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously.
When using as glazed tile,the drawing profile like following:
So based on those drawing profile, we design the Galvanized Metal Standing Seam Roof Sheet Roll Forming Machine like the following:
Galvanized Metal Standing Seam Roof Sheet Roll Forming Machine is composed by the following elements:
| Item |
Name |
Qty |
| 1 |
Manual Decoiler or hydraulic decoiler or motor decoiler |
1 |
| 2 |
Feeding platform with hand cutting system or motor shearing system |
1 |
| 3 |
Main forming system |
1 |
| 4 |
Hydraulic cutting system |
1 |
| 5 |
Hydraulic pump station |
1 |
| 6 |
Electrical motor |
1 |
| 7 |
PLC control system |
1 |
| 8 |
Touch screen operation |
1 |
| 9 |
Finished products receive table |
1 |
| 10 |
Safety shield(optional) |
1 |
Product Description:
The finished product of Galvanized Snap Locking Self-lock Standing Seam Roofing Panel Roll Former is widely used in the construction of various industrial plants, villages, warehouses, supermarkets, hotels, exhibition, family construction, shopping malls shutter doors and etc. It has the advantage of beautiful, classical appearance and grace taste.
Leveling part with the adjustable board and handrail, and also the manual cutter:
Adopt guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming system. Can adjust the guiding bar with loosing the fixing bolts to feed sheet in right position. It's fixed structure to make sure can not move easily.
Roll Forming System:
Cutting device:
For the Galvanized Snap Locking Self-lock Standing Seam Roofing Panel Roll Former, the shearing part, we use the post pillar shearing system. when machine does shearing, it is more easy and powerful.
A. Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no material wasted.
B. Adopts welded frame for good rigidity.
C. The cutting action is droved by the power from hydraulic station which guarantees the procession of the cutting and low noisy, long life.
Hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pumps drive the cutter machine to begin the cutting job.
The system includes a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. And two sets of electromagnetism valves.
Power of the oil pump: 3kw
Hydraulic oil: 40#
PLC control system:
It adopts industrial computer to control. The target piece's length is adjustable and digit of it can be adjusted. Computed mode has two modes: Automatic and manual one. The system is easy to operate and use.
Processing precision: Within 1.00mm
It contains liquid crystal screen, programmer, transformer for the electronic machines and kits of every part. Touch screen
PLC is Taiwan Panasonic
Transducer brand is taiwan taida
The seller should provide Chinese and English language screen
Counter
One counter gauges length, pulses, and decides length.
Flow chart
Loading picture:
| main parameter of Galvanized Metal Standing Seam Roof Sheet Roll Forming Machine |
Suitable to process
|
Steel plate |
Width of the plate
|
1000mm/1200mm/1250mm |
| Rollers |
9-11rows |
Dimensions
|
5.8*1.55*1.51m |
| Power |
4kw+4kw |
| Thickness of the plate |
0.3-0.7mm |
| Productivity |
8-10m/min |
| Diameter of the roller |
¢70mm |
Weight
|
About 3.4T |
Voltage
|
380V 50Hz 3phases |
Audited Supplier 
){kind=link}
){kind=link}