After-sales Service: | Provide |
---|---|
Warranty: | Provide |
Tile Type: | Colored Steel |
Certification: | CE, ISO |
Condition: | New |
Customized: | Customized |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Basic parameters | ||||
Name |
Uncoiler, straightener, NC servo roll feeder, 3 in 1
|
|||
Model | NCBF-600B | |||
Width of the material | 50mm~800mm | |||
Thickness of the material | 0.4mm~4.5mm | |||
Straightening capacity (σs≤250MPa) |
|
|||
Inside coil diameter | Φ460mm~Φ530mm | |||
Max.coil outside diameter | Φ1400mm | |||
Max.coil weight | 5T | |||
Straightening roll diameter | Φ76mm×7(upper*4/lower*3) | |||
Material of straightening roll | GCr15(HRC58-62) | |||
Feeding roll diameter | Φ84mm | |||
Uncoiler power | 2.2Kw | |||
Straightening power | 4.4Kw | |||
Feeding speed | 0~20m/min | |||
Feed pitch Accurary | <±0.2mm | |||
Other configuration | ||||
Straightening adjustment type | Eccentric shaft adjust by worm and gear | |||
Load material type | coil car | |||
Feeding line adjust | Electric | |||
Hold down arm device | By pneumatic | |||
Auto threading table device | By hydraulic | |||
Coil keeper adjust width | Manual | |||
Front coil keeper adjust open | Pneumatic | |||
Coil width guide at the straightener | Two hand-wheel adjusted | |||
Coil tip de-bender device | Hydraulic | |||
Operation control mode | Main control cabinet + action unit remote control switch |
|||
Coil end detect sensor | With | |||
Purchased parts brand | ||||
Main bearing | HRB,ZWZ | |||
Servo motor | Japan YASKAWA(SGMGH) | |||
Man-machine interface | Taiwan WEINVIEW(Colored) | |||
Common motor | Taiwan Wanxin | |||
Frequency changer | Taiwan DELTA | |||
Pneumatic unit | Taiwan Airtac | |||
PLC | Japan Mitsubishi | |||
Relay | Japan Omron | |||
Hydraulic fittings | Beijing HUADE | |||
Other technical data | ||||
Pneumatic pressure | 0.5Mpa | |||
Hydraulic pressure | 7Mpa | |||
Voltage | 3phase 380V | |||
Feed Leveler from floor | 1050mm-1250mm | |||
Input material type | From down to up | |||
Standard direction | From left to right | |||
Equipment length(Not included outlet shelf) | ≈4.5m |
Suppliers with verified business licenses